Central-Moov

BUILT TO PERFORM IN THE MOST CHALLENGING ENVIRONMENTS

Introducing the Central-MOOV with Heat+ technology from MOOVAIR, an HVAC system that harnesses advanced technology to deliver unwavering reliability, ensuring your home or business stays perfectly comfortable across a broad range of climate extremes.

HIGH EFFICIENCY

At full capacity, the rated efficiency of the Central-MOOV system boasts up to 18 SEER2 and 10 HSPF2, which is very efficient. But much of what makes its operating costs so low cannot be measured by a simple standardized test.

Unlike traditional HVAC equipment that’s either ON full power or OFF, the Central-Moov’s fully modulating inverter compressor varies its capacity (and electric power consumption) relative to demand at any given moment. As a result, it runs longer at something far less than full power most of the time. That not only reduces energy bills, it also decreases normal equipment wear and tear through a significant reduction of on/off cycles. This functionality also increases comfort by maintaining even temperatures consistently.

HEAT+® PERFORMANCEHEAT+® PERFORMANCE

Typical heat pumps, inverter or not, begin to lose heating capacity at just 40ºF. The colder it gets outside, the more those systems rely on supplemental electric resistance heat (KW strip) to meet the heating demand. Not the Central-MOOV system though. Thanks to its patented Heat+ design, it will deliver 100% of its rated heat capacity down to 4ºF using only the compressor, which is two to three times more efficient on average than using electric backup heat alone. The energy savings this delivers is very significant, but difficult to measure on any standardized test. The system doesn’t even use electric strip heat during defrost cycles like traditional heat pumps and will operate at nearly 60% of capacity down to -22ºF outside.

BULLETPROOF OPERATION

The Central-MOOV works differently than many other HVAC systems. Onboard sensors interact with an advanced Electronic Expansion Valve (EEV) to monitor internal temperatures and pressures, allowing the system to automatically react and self-adjust for a healthy compressor. It also has many automatic failure prevention sequences. For example, the condenser fan runs backwards for 30 seconds periodically to clear itself of debris. It will also pause to run various self-diagnostic functions if needed to prevent a fault. It even has a heated base pan to prevent ice accumulation from plugging its internal drains. Other benefits come from its robust construction, like a water and fireproof e-box capped with a metal plate, where sensitiveelectronics are housed. There are many more examples like these that make the Central-MOOV one of the most durable and reliable HVAC systems on the market.

MULTI-POSITIONAL

The air handler or add-on coil can be installed in an upflow, downflow, or horizontal L/R position to suit your needs, no conversion kit required.

RETROFIT FLEXIBLE

The system comes with accessories to allow for line set connections to be made via braze, flare or mechanical press fittings. Existing line sets may be reused provided they are cleaned and size-verified by a professional (see installation instructions for piping detail.) Terminations on the equipment are in common 3/8-3/4 or 3/8-7/8 sizes, depending on the model.

REMOTE CONTROL WITH FOLLOW ME® FUNCTION INCLUDED

The Central-MOOV system comes with a multi-purpose remote control in the box. The user can assign temperature sensing to the remote instead of the thermostat on the wall. Keep the remote close by to ensure comfort wherever you are. The remote also doubles as a technician’s service tool for advanced diagnostics and prompting remote commands. No internet connection required.

OPTIONAL EMERGENCY HEATING KIT

Backup heating kits designed for the Central-MOOV air handler are available in 5kw, 8kw, 10kw, 15kw & 20kw.

FILTER RACK

A durable filter rack is included on the Central-MOOV air handler, which accepts standard filter sizes available at most retail stores nationwide. The filter door is tool less, secured by strong magnets. Filters: 1.5 & 2 ton = 16×20, 2.5, 3 & 4 ton = 20×20, 5 ton = 24×20.

DOWNLOAD BROCHURE

To explore more, download the Central-Moov Series brochure.

Documents

Technical specifications